A Basic Step by Step Guide to Using MAPS In Minutes

A Basic Step by Step Guide to Using MAPS In Minutes

Introduction

If you are using Free Hand or Illustrator the principal aspect of using Maps In Minutes (MIM) is the use of the Layers palette. Each MIM map is constructed through a series of many different layers, each one can be set to visible or not visible. By controlling how you view layers you have extensive control over how you use the map.

In this work-through, we’ll take a brief view of the powerful capabilities of the MIM and unlock some of the secrets of how to get the best out of them. In the work-though that follows we’ll be using the Deluxe version of the British Isles 1M scale map using Adobe Illustrator 8 as the main application. Don’t worry if you are a FreeHand fan, the layering principles are essentially the same.

Using MAPS in Minutes

Are you looking for a quick and easy way to add a GPS unit to your cell phone? If so, this article will be a great help to you. Here we will go through some of the basic steps that you can do to use a simple application like Google Maps. If you’re interested, you should read on. First of all, you must have the Google Map software downloaded onto your computer. If you have it installed already, all you have to do is turn on your computer, and who will install the software into your system?

To use this software, you need to point and click on the map that you want to use. Clicking will move the cursor on the map, allowing you to select a particular place that you want to enter. When you are telling, you are simply directing the GPS unit where you want it to go.

After you have installed the software, you can begin using it. There are two ways that you can go about this. The first is the easy way to point and click on the map you want to use. The second is to use the command line feature

as part of the installation. By doing this, you will use the GPS device by typing out a single key on your keyboard.

Now that you know how to do it, the next step is to turn on the actual program. To do this, you will need to first click on “maps” from the main menu. Next, you will see the map that you want to use. You can then type in your starting point and your destination and click “OK”. That will install the program onto your computer, allowing it to show up on your screen shortly.

Once this has been done, you should now be able to look at the screen of your computer, and it should say something about itself. If it does not, you will need to go to the settings section of your system and click on the arrow pointing towards the version that you are using. By selecting it, you will see how to change it to that which you need.

An essential step-by-step guide to using MAPS in minutes is something that any computer user should know about. Even if you are only using this to get a general idea of how the world works, you should learn more about how to use it so that you will be able to find the most exciting places without too much trouble. And of course, with the help of the map, seeing these places should not be too much of a problem.

Step One – Opening the Map

When you first open a MIM map. The first thing you’ll notice is that all the layers will be turned on for you including a MIM start-up page. To quickly turn off all the layers simply Option-click on any of the layers. You will now have a blank-looking document.

Step One - Opening the Map

Step Two – Setting Coasts And Borders

The layers palette has the two layers needed to produce map outlines. MIM maps are designed to allow you to create either simple maps using only a minimum number of layers or highly complex maps while retaining complete control over the information presented in the map.

Scroll down the Layer’s palette until you see the Layer for Coastline and England, Scotland, and Wales’s country boundaries and the fills for these counties. Activate these layers by clicking on the Layer name in the palette.

Step Two - Setting Coasts And Borders

Step Three – How to Use a Map, Setting Custom Views

Using Illustrator’s views feature it’s not a bad idea to save specialized opinions that you can jump too quickly. From the View, Menu selects New View. Inside the dialog box enter a name for the view.

Step Three - Setting Custom Views

Step Four – Use Map Viewing Roads

All the roads are supplied in Road Case layers. You can choose to view road names and all the major routes across the UK. In this example, we have just selected all the UK motorways along with their junction numbers and service station points. Notice how the map contains very accurate and detailed information.

Step Four - Viewing Roads

Step Five – How to Use Maps Viewing Settlements

Adding settlements is easy with MIM. Cities and Towns have their own layers and are divided by population levels. For example, you could view towns that populations of less than 3000 or over 1 million.

Step Five - Viewing Settlements

It’s your choice. In this example, we set the Layers to view populations of 200K or greater and to include 10K to 50K. If you want a more graphic example of larger population densities try turning on the ‘Urban Sprawl’ layer.

Step Five - Viewing Settlements 2

Read More: Choosing The Best Handheld GPS Device